Competition EVO 08 long w. FG Magura Brake/ Clear Body

Competition EVO 08 Kit: The undercarriage is built on an 8mm CNC-cut alloy chassis with lateral carbon fiber stiffenings for an easy and fast adjusting of the chassis stiffness. The chassis bottom has groovings in order to reduce the support of the chassis when touching the ground. Front and rear axle consist of double wishbones, all necessary adjustments can be made there. Alloy engine quick-fixing device, large engine mount and gear plate are manufactured in one piece. This allows an optimal smooth running and a longer durability of ball bearings and gearwheels. The front axle geometry enables a neutral front axle adjustment. The rear axle is equipped with a self-locking fourfold differential gear. The hardness of the ball-bearing servo saver can be adjusted through o-rings. The shock absorbers are fitted with alloy pistons and hardened piston rods. For simple and fast refueling we provided a fuel tank with a snap closure. All chassis upper works such as engine, tank, rc-plate and the front axle were milled as deep as possible into the chassis plate in order to achieve a low centre of gravity. The ball stabilizer at front and rear axle can be adjusted in hardness and in position of the stabilizer rods without distortion. Optionally we deliver the chassis either with Tuning bowden cable brakes or with hydraulic brakes for the front or respectively rear axle. The bodyshell is made of clear polycarbonate, the rear spoiler of carbon fiber. The tires are glued on the rims. The model is powered by a high-performance 23ccm Zenoah engine with airbox and Tuning pipe. Zenoah G240 / G270 engines